Ryobi EBS-8021V Manuel D'utilisation page 5

GB
FR DE ES
SPECIFIC SAFETY INSTRUCTIONS FOR
SANDERS
„ Always wear safety goggles and a dust mask
when sanding, especially sanding over-head.
„ The machine is not suitable for wet sanding.
„ Do not use sanding paper larger than needed.
Extra paper extending beyond the sanding pad can
also cause serious lacerations.
„ The dust bag shall be equipped with the tool.
It shall be emptied frequently. To connect dust bag,
insert the adapter of dust bag to the dust-collection
opening on the rear end of the sander.
WARNING
Do not throw sanding dust on an open fire
because materials in fine particle form may be
explosive.
WARNING
A suitable breathing respirator must be worn
while sanding lead paint, some woods and metal
to avoid breathing the harmful/toxic dust or air.
BELT SANDER SAFETY PRECAUTIONS
„ Hold the tool firmly with both hands.
„ Keep the cord away from the rotating abrasive belt.
„ Keep your hands away from retoting parts.
„ Do not place the tool on a surface while the belt is
still moving since belt rotation will cause it to move
and may result in the tool being damaged or personal
injury.
„ The tool must be used only for dry sanding.
„ Do not continue to use worn or torn abrasive belts.
„ Clamp the work piece if it does not remain stationary
due to its own weight.
„ Turn the tool on before applying it to the work piece.
Turn the tool off after it has been lifted away from the
work piece.
SPECIFICATIONS
Input
Power
No load speed
Belt size
Net weight
IT NL PT DK SE
230 V
800 W
150-300 m/min
76 x 533 mm
3.6 kg
FI NO RU PL CZ
English
Be sure to check the nameplate on the product,
because the voltage is subject to change depending
on the area in which the product is to be used.
DESCRIPTION
1. Adjustable front handle
2. Sanding belt
3. Tension release lever
4. Rear handle
5. Dust bag
6. Dust port
7. Lock-on button
8. Switch
9. Adjustment screw
10. Front roller
11. Rear roller
12. Variable speed control
13. Livetool Indicator
14. Front handle release button
15. Slot holder
STANDARD ACCESSORIES
Dust bag, Abrasive belt.
OPTIONAL ACCESSORIES
G-Clamp, Sanding frame.
APPLICATIONS
Use only for the purpose listed below:
1. Surface finishing for wood.
2. For removal of rusl and surface finishing for metal.
NOISE BUILD-UP
Noise (sound pressure level) in the workplace can exceed
85 dB(A). In this case, sound insulation and hearing
protection measure must be taken by the operator.
SWITCH (FIG. 1)
This tool is started and stopped by squeezing and
releasing the trigger (8).
For continous operation, press the lock-on button (7)
50 Hz
while trigger is being squeezed. Squeeze trigger again to
release the lock.
The belt speed can be freely adjusted from 150 to 300
m/min by turning the variable speed control (12).
(1= lowest speed / 6 = highest speed )
1
HU RO LV LT EE
TM
HR SI SK GR TR