Red Sea MAX NANO Guide D'installation page 130

Red Sea Hydra 26™ HD LED
Acclimation
To set and activate the acclimation option, click on "EDIT" and then click
on the ON/OFF button.
Set the Start and End date for the acclimation period.
Move the cursor to the right hand slider to set the starting percentage
reduction equally for all color channels. i.e. if you want to start at 60%
intensity set the "Starting Percentage Reduction" to 40%.
Click on "Save" to exit the window. The dates of the active acclimation
period will now be shown on the control screen. The acclimation function
will automatically switch off at the end of the set acclimation period.
The acclimation settings can be adjusted or switched off at any time.
OFF
Acclimation ?
Disabled
EDIT
6
Acclimation
ON
Starting Percent Reduction
Start
Jan 1, '15
End
Feb 26, '15
40
Button Function
To reset the LED Module's network setting, press and hold the button until
the LED indicator blinks green.
To reset the LED Module to its factory default settings, press and hold the
button until the LED indicator blinks red
Note: When the LED Module is in an un-configured state, all of the LEDs
will be permanently on. Pressing the button will increase all color channel
intensities by 20%.
EDIT
40 40 40 40 40
Save Acclimation
Start: Jan 1, '15
End: Feb 26, '16
ALL
40 40
ON
?
EDIT