Trouble Shooting - WIKA SL-1 Mode D'emploi

9. Maintenance / 10. Trouble shooting
9. Maintenance
WIKA pressure transmitters require no maintenance.
„
Have repairs performed by the manufacturer only.
„

10. Trouble shooting

!
Open pressure connections only after the system is without pressure!
Warning
! Take precautions with regard to remaining media in removed pressure trans-
„
mitters. Remaining media in the pressure port may be hazardous or
toxic!
Warning
Remove the pressure transmitter from service and mark it to prevent it from
„
being used again accidentally, if it becomes damaged or unsafe for operation.
Have repairs performed by the manufacturer only.
„
Do not insert any pointed or hard objects into the pressure port for cleaning to prevent
„
damage to the diaphragm of the pressure connection.
Do not clean the pressure port with liquids or compressed air!
„
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi SL-1
EN
13