Manual Unlocking - SCS Sentinel CTR51 Manuel D'installation Et D'utilisation

EN
> MANuAL uNLoCkINg
unlock the cover situated on the motor with the key and pull towards you in order to free the mechanism.
The cover may offer some slight resistance, this is normal. Now it is possible to move the gate manually.
It is imperative, at this stage, to check that the gate slides as easily now as before the installation of the
motor.
If this is not the case, then the gap between rack and pinion is too small.
Adjust the position of the motor in order that there is between 1.5 and 2mm of play between the teeth
of the rack and the pinion.
> INSTALLATIoN oF ThE MEChANICAL TRAvEL LIMITS.
(Diagrams are as seen from the inside of the property)
2 limit switches
ème
1 limit switches
ère
open at left
2 limit switches
ème
1 limit switches
ère
open at right
en ::: 23 en ::: 23