Sony VPL-SC50U Mode D'emploi page 13

How to use the adjuster
To adjust height
While lifting the projector, adjust the height so that the
projector becomes level.
Press the adjuster button while lifting the projector to
adjust the height.
Adjuster button
The two fine screw-up adjusters are equipped with the
projector.
As for the fine screw-up adjusters, turn them for fine
adjustment.
To raise To lower
the projector
the projector
To stand the projector firmly
The adjuster can be stretched outwards to stand the
projector firmly.
Notes
• Be careful not to let the projector down on your
fingers.
• Do not push hard on the top of the projector with the
adjusters out.
• If the adjuster is not stretched out toward right and
left sides of the projector, the unit may be
overbalanced.
Fine screw-up
adjuster
13
(EN)