Using The Menu - Sony VPL-SC50U Mode D'emploi

Using the MENU

The projector is equipped with an on-screen menu for
making various adjustments and settings.
To select the language used in the menu, see page
29 (EN).
1
Press the MENU key.
The menu display appears.
The menu presently selected is highlighted in blue.
I N P U T – A
P I C T U R E C T R L
C O N T R A S T : 8 0
B R I G H T : 5 0
G A MM A M O D E : G R A P H I C S
C O L O R T E M P : H I G H
2
Use the V or v key to select a menu, then press the
b or ENTER key.
The selected menu appears.
Menus Setting items
I N P U T – A
S E T S E T T I N G
S T A T U S : O N
L A N G U A G E : E N G L I S H
S P E A K E R : O N
P OW E R S A V I N G : O F F
S I R C S R E C E I V E R : F R O N T & R E A R
3
Make setting or adjustment on an item.
For details on setting individual items, see the relevant
menu pages.
24
(EN)
To clear the menu display
Press the MENU key.
The menu display disappears automatically if no key is
pressed for one minute.
To reset items that have been adjusted
Press the RESET key.
"Complete!" appears on the screen and the settings
appearing on the screen will be reset to their factory
preset values.
Items which can be reset are:
• "CONTRAST", "BRIGHT", "COLOR", "HUE", and
"SHARP" in the PICTURE CTRL menu
• "DOT PHASE", "SIZE", and "SHIFT" in the INPUT
SETTING menu.
About the memory of the settings
The settings are automatically stored in the projector
memory.
When no signal is input
When there is no input signal, the screen turns blue
and "NO INPUT–Cannot adjust this item." appears on
the screen, and each item cannot be adjusted.
V I D E O N O I N P U T
I N P U T S E T T I N G
N O I N P U T –
C a n n o t a d j u s t t h i s i t e m .