General Information - WIKA TF35 Mode D'emploi

1. General information

1. General information
The screw-in thermometer described in the operating instructions has been
„
GB
designed and manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria
during production. Our management systems are certified to ISO 9001 and
ISO 14001.
These operating instructions contain important information on handling the
„
screw-in thermometer. Working safely requires that all safety instructions
and work instructions are observed.
Observe the relevant local accident prevention regulations and general
„
safety regulations for the screw-in thermometer's range of use.
The operating instructions are part of the instrument and must be kept in the
„
immediate vicinity of the screw-in thermometer and readily accessible to
skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating
„
instructions, prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by
„
using the product contrary to its intended use, non-compliance with these
operating instructions, assignment of insufficiently qualified skilled person-
nel or unauthorised modifications to the screw-in thermometer.
The general terms and conditions, contained in the sales documentation,
„
shall apply.
Subject to technical modifications.
„
Further information:
„
- Internet address:
- Relevant data sheet:
- Application consultant:
4 WIKA Operating Instructions Screw-in Thermometers, Model TF35
www.wika.de / www.wika.com
TE 67.10
Tel.: (+49) 9372/132-0
Fax: (+49) 9372/132-406
E-Mail: info@wika.de