System Overview - Husqvarna AUTOMOWER 550H EPOS Guide Rapide

QUICK GUIDE
A

System overview

The EPOS system contains a robotic lawn mower, a
charging station and a reference station. The robotic
lawn mower and the reference station receives satellite
signals for positioning. The reference station is
stationary and sends correction data to the robotic lawn
mower to get an accurate position for the robotic lawn
mower. The work area is made virtually in an app by
operating the product and adding waypoints to make a
map in an app.
1. Navigation satellites
2. Satellite signals
3. Reference station
4. Correction data
5. Charging station
6. Virtual boundary
7. Stay-out zone
8. Work area
9. Mobile device
10. Docking point
11. Transport Path
For a complete map installation a work area and a
charging station are necessary. A work area is an area
where the product can operate and cut grass
automatically. A work area is specified by virtual
boundaries. The charging station can be put in the work
area or near the work area that is connected to it with a
transport path. A transport path is a specified path
between the docking point and a work area. The product
can operate automatically in this path, but not to cut
grass. Stay-out zones can be made if there are areas in
the work area where the product is not allowed to
operate. A stay-out zone is specified by virtual
boundaries. A point of interest is a specified position
where the product can be parked at.
B
Connectivity
a. Automower® Connect app is used for settings and daily
operation of the product.
b. Husqvarna Fleet Services™ is a cloud solution that gives
the commercial fleet manager an updated overview of all
the products. This is available both as a web service and
as an app.
QG_P2Z_1142322.indd 3 QG_P2Z_1142322.indd 3
C
Installation
The reference station and the robotic lawn mower needs
unimpeded sky view to be able to operate reliable
without stops.
1. Install the Automower® Connect app and Husqvarna
Fleet Services™ app to your mobile device. Download the
apps from App Store or Google play.
2. Install the reference station. Refer to Operator's manual
for the reference station.
3. Install the charging station.
4. Pair the robotic lawn mower with the app.
5. Pair the robotic lawn mower with the reference station in
the app.
6. Pair the robotic lawn mower to the charging station and it
will specify the docking point in front of the charging
station.
7. Specify the work area by operating the product clockwise
with appDrive around the work area and adding
waypoints on the map in the app.
8. Specify the stay-out zones by operating the product
counter clockwise with appDrive around the stay out
zone and adding waypoints on the map in the app.
9. Specify the transport path by operating the product with
appDrive and adding waypoints on the map in the app.
Start the transport path in the work area and operate the
product with appDrive adding waypoints on the map in an
app and finish it by connecting it to the docking point.
10. Specify the point of interest and make a path to the
charging station. Start at the point of interest and operate
the product with appDrive with adding waypoints on the
map in an app and finish it by connecting it to the docking
point.
11. Use the app to adjust the schedule and the settings for
the robotic lawn mower.
For more information, read the Operator's manual
for the reference station and the Operator's
manual for the robotic lawn mower.
EN EN
2020-12-03 11:48:26 2020-12-03 11:48:26