Reading The Battery Gauge For Installed And; Uninstalled Battery(S) - Invacare Platinum Mobile Manuel D'utilisateur

1. For charging of the battery(s) after initial charging, do
one of the following:
• Connect the AC power adapter (if charging from a
wall outlet). Refer to External AC Power in Setup.
• Connect the DC power cable (if charging from a
vehicle). Refer to External DC Power in Setup.
• Remove battery and charge with the optional
External Battery Charger accessory, Model
POC1–115.
2. Monitor the battery charge level and charge until full.
Refer to Battery Gauge for Installed and Uninstalled
Battery(s) in Setup.
3. Disconnect external power from the concentrator for
portable operation.

3.3.3 Reading the Battery Gauge for Installed and

Uninstalled Battery(s)

Battery Gauge for Installed Battery(s)
1187376-C
The battery gauge A shows the status of the installed
battery charge level when the concentrator is turned on and
when the concentrator is off but connected to an external
power source. The number of illuminated segments B
of the battery gauge A indicates the charge level of the
installed battery. If two batteries are installed the indicated
charge level is that of the least charged battery.
Number of Lit Segments B
1
2
3
4
When the concentrator is connected to an external power
source (whether the concentrator is turned on or off) the
"last" or "highest" segment B of the battery gauge A also
Setup
Charge Level
0–25% charge
26–50% charge
51–75% charge
76%-100% charge
27