GEBUWIN WA200 /D Série Mode D'emploi page 9

GB
1. Introduction
Dear client,
Thank you for having made your choice, you have chosen a professional hoisting product which has been
developed, produced and tested with the greatest of care.
It is essential that you first carefully read the instructions before using the product.
Further more, we wish to refer you to our website:www.gebuwin.com from which various accessories for this
winch can be purchased e.g. complete cable sets and special drive lubricating grease.
In addition, this website provides download information on the following:
- service information
user's manual
-
- GEBUWIN winch dealers
2. Safety Precautions
Type WA winches are cable winches that have been developed to be driven by a battery spiral drill with brake. The
battery spiral drill is not supplied!
The winches are only to be used for the lifting of goods. Transport (lifting) of persons as well as their
being located under a moving load is not permissible.
The winches have a static safety factor of 4.
The winches are not suitable for:
mechanized drive
-
continuous use
-
use in an area in which aggressive and/or explosive substances are used.
-
Technical alterations and/or the attachment of marginal devices to the winches are permitted only with the
manufacturer's written consent.
Servicing, mounting, possible repairs and the winch maintenance are permitted only by specialized persons
who:
have been appointed and authorized
-
have been trained
-
are familiar with the correct regulations
-
always use original parts for repairs
-
2.1. Winch
The winch is fitted with a self-braking worm wheel drive, which holds on to the load at any level and ensures it can
be controlled downward.
The stipulated hoisting capacity calculated on the first cable layer, stated on the type identity sticker must not be
exceeded.
The winch must at least be mounted with the required mounting materials from chart 1.
The winch is suited for wall and floor (console) assembly.
Never touch moving parts during use!
Always run the following check before use:
brake function
-
quality of the cable and hoisting parts
-
carrier construction
-
The winch must be tested by a professional at least once a year.
2.2. Load
Pay attention to the following with respect to the load:
never leave the load unattended whilst elevated
-
do not allow the load to sway
-
never allow the load to fall abruptly from the cable
-
ensure that the hoisting height remains in clear view
-
8