Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Never leave the battery spiral drill hanging with its own weight to the flexible coupling. The coupling is not
geared to that.
Lifting of the load occurs clockwise. Lowering of the load occurs in the
opposite direction.
4. Maintenance
The winch must be unloaded for inspection and maintenance tasks.
Inspection and maintenance tasks must be performed by skilled personnel, e.g. via your Gebuwin
dealer.
Inspection/ Maintenance
interval
Before each use
Per quarter
Annually
5. Troubleshooting
Trouble/Malfunction
The unloaded winch rotates
heavily
load does not immediately
hang still
small lifting capacity and
battery is empty
6. Service
For servicing and/or servicing parts contact your nearest Gebuwin dealer.
The exploded view diagram with regard to the servicing parts is available on the internet website:
www.gebuwin.com
Orders for any necessary servicing parts can also be placed on the website.
Use original servicing parts only, correct functioning cannot otherwise be guaranteed!
Tasks
visually check cable and loading hook
-
check the brake function
-
visually check cable and loading hook for any fracture
-
-
check the cable according to DIN 15020 pg. 2 for wear and tear; also
test and maintain the minimum breaking force.
check the tightness of the mounting bolts
-
check all the winch parts for wear and tear; replace where necessary;
-
grease where needed.
check the type identity sticker for clarity
-
Cause
during mounting the winch has
-
pulled askew
-
battery spiral drill used without
brake
spiral drill used with too light
-
battery
Solution
level the mounting surface and re-
-
mount the winch
-
use battery spiral drill with brake
recommended is to use min.
-
battery with capacity of 14.4V and
3Ah
12
Publicité
Table des Matières
