Tech Line DVRC 700 Mode D'emploi page 188

DF-T3712S-SA-W(GB) 2006.9.13 10:0 AM ˘ ` 9 mac001
Stops playback or recording.
Skips to the next or previous chapter/track.
Starts recording. Press repeatedly to set the recording time. For more
details, Refer to One Touch Record (OTR) on page 38.
Selects Recording mode: - DVD ; Approx 1 Hour (HQ mode), 2 Hours (SP
mode), 4 Hours (EP mode), 8 Hours (SEP mode)
Increases or decreases the slow motion speed when playing a DVD or VHS
tape.
Displays the finalize menu for DVD-RW/±R discs.
Displays the digest menu for DVD/VCD discs.
Displays a disc's Title menu, if available.
Selects a DVD camera angle, if available.
Switches between the DVD Recorder+VCR tuner and your TV tuner.
Repeats the current chapter, track, title or the entire disc.
Repeats playback between two points (A and B).
Displays the Timer Recording menu.
Progressive Scan Mode
• If your TV supports Progressive Scan, you can view high quality video by setting the
DVD Recorder+VCR to Progressive Scan mode. If your TV does not support
Progressive Scan, do NOT change to Progressive Scan mode.
If you do so accidentally, press and hold the [P.SCAN] button for 3 seconds to restore
normal viewing.
• When video output mode is changed from RGB to Interlace or Progressive (Scart 1)
will not be correct colour for Component video.
• As component outputs have their own Jacks on the back side, change the TV input
into Component input, after connecting the component cables from the DVD
Recorder+VCR to TV.
• Changing from Interlace or Progressive to RGB, should be the opposite of above.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS
ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION
TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING
OUR TV SET COMPATIBILITY 'WITH THIS MODEL 'DF-4501P' DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTRE.
1200DPI 90LPI
Identification of Controls
- VCR : SP or LP.
9