Analogue Tdcontrollers Specifications - Nexo PS Série Manuel D'utilisation

P.28
___________________________________________________________________________________________________

Analogue TDcontrollers Specifications

PRODUCT FEATURES
Audio Inputs
Sense Inputs
Audio Outputs
Controls
Indicators
Dimensions
Weight :
SPECIFICATIONS
Output Section
Input Section
THD+N
Noisefloor
Dynamic Range
Crosstalk
Filtering & EQ.
Protections
Power Supply
Conformity
SYSTEM OPERATION
Applicable Products
SubBass
PS SERIES MANUAL REV3 10/10/05
ANALOGUE TDCONTROLLERS SPECIFICATIONS
Two differential non floating L&R Audio inputs, 50 kOhm. Two XLR-3F connectors.
Three Amplifier Sense Inputs (PS L&R, LS). 400 kOhm. 6 Pole Removable Strip Terminal
Two L&R PS Audio outputs. Balanced, non floating, 51 Ohm. Two XLR-3M.
One Mono (L+R) LS400 Audio output. Balanced, non floating, 51 Ohm. One XLR-3M.
Gain switch (back panel), 3 positions : -6 / 0 /+6dB.
Peak Limiter trimmer (600W-200W/8 Ohms) for PS8 & 10
Sub Overlap / Crossover switch & Sub Gain Control (-/+ 6dB).
LF speakers Protect Yellow LED's (Temp. & Disp), Power ON (green), Amp Sense & Peak
LED's (green/Red)
1U 19" Rack. 165mm (6.5") Depth
2.9 kg (6.6 lbs) net
+22 /+16/+10 dBm typ. into 600 Ohm load. Back Panel switch on +6/0/-6dB respectively.
Maximum input Level : 22dBu. CMRR 90dB @ 1kHz typ.
0.05% @ 1kHz Typ. for +10dBm Output
PS8TD -100 dBV PS10TD: -103dBV PS15dB: -98dBV for 0dB switch position (22 Hz - 22 kHz,
UnWeighted)
111 dB UnWeighted (THD+N at-60dBr sine wave @1kHz rel.max. output)
104dB
L&R: 12dB/oct Low Pass, 12dB/oct High pass (crossover or overlap), 4 Parameter EQs. All
factory tuned
VCA temp. (SUB,LF & LF), VCEQ disp. (SUB & LF), Peak Limiter (all chanels), Power
compression regulation
100-250 Volts (continuous operation), 50/60Hz. Power 9W. Peak Inrush current 0.5A. Earth-Lift.
Comply with safety objective of 73/23/EEC & 89/336/EEC directives. (EN60065-12/2001,
EN55103-1996).
CB scheme DK-8371, cULus 60065 AZSQ E241312, FCC part15 class B
The PS8 TDcontroller is precisely matched to the PS & LS cabinets and includes sophisticated
protection systems. Use of either product without a properly connected Controller will result in
poor sound quality and may damage the components.
Active two-way operation of the PS8 Loudspeaker with the LS Subwoofer is included in the
Analogue PS TDcontroller .