Publicité
Les langues disponibles
Les langues disponibles
P.18
___________________________________________________________________________________________________
Analogue TDcontroller USER GUIDE
Read before use
Each Analogue TDcontroller is designed to be used with its proper set of speaker cabinet (PS8 / LS400,
PS10 / LS500; PS15 / LS1200). They are not interchangeable. Its main functions are:
To optimize the response of the system
When operating with the LS SubBass system (optional), splitting the stereo (2 channel) signal into 2
frequency bands (PS main system and LS SubBass system)
Active protection of the cabinets by dynamic audio signal processing (Temperature and
Displacement servo control)
Reduction of amplifier overload (Peak limiter function)
Analogue TDcontrollers also feature:
Stereo operation (2 independent channels) for the main system
Global switchable output level
Adjustable level on the SubBass channel
High CMRR input stage and High current drive output
Compensation of power compression effects on the system response curve.
The Analogue TDcontroller is designed to be inserted between the Audio source (console, preamplifier,
etc.) and the power amplifier.
Front Panel
Most front panel functions and indicators are located inside 2 distinct windows: left-hand areas relate to
functions and indicators dedicated to the optional Sub-bass section, while right-hand window contains
indicators concerning servo control operation for the PS cabinets.
For more technical details about servo control operation and internal electronic processing, please refer
to section "TDcontroller REFERENCE GUIDE." Page 22.
PS SERIES MANUAL REV3 10/10/05
ANALOGUE TDCONTROLLER USER GUIDE
Publicité
Chapitres
