Amplifiers; Ps8Amp & Ps10Amp - Nexo PS Série Manuel D'utilisation

P.24
___________________________________________________________________________________________________

AMPLIFIERS

PS8Amp & PS10Amp
Please note that this equipment is not UL approved and therefore not sold on the US market.
The PS8Amp and PS10Amp are power amplifiers tailored for PS8 and PS10 system and their respective
LS400 & LS500 sub bass requirements. Their structure and power being identical, they share the same
specifications:
Total integration of a TDcontroller (with internal sense connection) which specifications are identical of
those of an independent TDcontroller described in the chapter "TDcontroller REFERENCE GUIDE" page
22
2 or 3 channel instantaneous configuration via front-panel switch, allowing a 3-WAY use with the
appropriate sub bass or a 2 WAY (wideband) configuration. Power delivered by the amplifier is thus
optimized for the proper configuration. Speaker wiring of each cabinet is also automatically re-assigned.
All connections and controls located on the front panel including mains fuses and voltage selection.
Super silent, back to front, variable speed fan cooling.
3 units high.
Inputs
Each balanced Line Input has a chaining male connector for operation of
multiple PSAmps. The L&R link switch simplifies Mono wiring when
independent PSAmp stacks are used for stage Left and Right.
PS SERIES MANUAL REV3 10/10/05
AMPLIFIERS