Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.
MAINTENANCE INSTRUCTIONS
5.1
After use and before performing maintenance, unplug and disconnect the Instant
Power™ (see sections 3 and 4).
5.2
Use a dry cloth to wipe all battery corrosion and other dirt or oil from the battery clips,
cords, and the Instant Power™ case.
5.3
Ensure that all of the Instant Power™ components are in place and in good working
condition, for example, the plastic boots on the battery clips.
5.4
Servicing does not require opening the unit, as there are no user-serviceable parts.
5.5
All other servicing should be performed by qualified service personal.
6.
MOVING AND STORAGE INSTRUCTIONS
6.1
Store the Instant Power™ in an upright position.
6.2
Store inside, in a cool, dry place.
6.3
Do not store the clips on the handle, clipped together, on or around metal, or clipped
to cables. The clips on the Instant Power™ are live and will produce arcing or sparking
if they come in contact with each other. To prevent accidental arcing, always keep the
clips on the storage holders when not using it to jump start a vehicle.
6.4
If the Instant Power™ is moved around the shop or transported to another location, take
care to avoid/prevent damage to the cords, clips and Instant Power™. Failure to do so
could result in personal injury or property damage.
surface where damage could occur if the internal battery should unexpectedly leak acid.
6.5
IMPORTANT:
•
CHARGE IMMEDIATELY AFTER PURCHASE
•
KEEP FULLY CHARGED
Charge the Instant Power™ internal battery immediately after purchase, after every
use and every 30 days.
All batteries are affected by temperature. The ideal storage temperature is at 70 degrees
Fahrenheit. The internal battery will gradually self-discharge (lose power) over time,
especially in warm environments. Leaving the battery in a discharged state may result
in permanent battery damage. To ensure satisfactory performance and avoid permanent
damage, charge the internal battery every month.
7.
TROUBLESHOOTING
PROBLEM
The Instant Power™ won't
jump start my car.
Do not use and/or store the Instant Power™ in or on any area or
POSSIBLE CAUSE
Clips are not making a
good connection to the
battery.
Connections are reversed.
The Instant Power™
battery is not charged.
The vehicle's battery is
defective.
REASON/SOLUTION
Check for poor connection
to battery and frame. Make
sure connection points are
clean. Rock clips back and
forth for a better connection.
Disconnect the Instant
Power™ and reverse the
clips.
Check the battery charge
status by pressing the
button on the front of the
Instant Power™. See LED
Indicators section of this
manual.
have the battery checked.
5
•
•
Publicité
Table des Matières
Dépannage
