Technical Data - AEG HC 5680 Mode D'emploi

English
20 20
General Use
• The device must be used only for dry hair.
• Take a strand of hair and pull it carefully downwards until
it is taut.
• The remaining hair should be put up or fixed in place.
• Before the halves are pressed together for approx.
5 seconds, we recommend that you ensure that the hair is
positioned correctly. Always begin at the base of the hair
and move the device in the direction of the hair tip.
• In order to produce a uniform appearance it is important
that the next strands fall in one line.
Cleaning
WARNING:
• Before cleaning remove the mains lead from the socket.
• Under no circumstances should you immerse the device in
water for cleaning purposes. Otherwise this might result in an
electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Clean the casing with a soft, dry cloth – without any
additional cleaning agents.
• The heating surfaces can be cleaned with a slightly damp
cloth. If necessary you can use a commercial dish washing
detergent.
• Dry the heating surfaces off thoroughly each time they
are cleaned!

Technical Data

Model: .................................................................................. HC 5680
Power supply: ...............................................220 - 240 V~, 50 / 60 Hz
Power consumption: ............................................................... 20 W
Protection class: ................................................................................
Net weight: .............................................................. approx. 0.33 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
HC5680_IM
Switch-off
1. Slide the switch to the "OFF" position after use.
2. Remove the mains plug.
3. Leave the device to cool before putting it away!
To this purpose place the device on one side of the
housing or hang it up by the suspension lug.
Disposal
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
This helps avoid the potential effects of incor-
rect disposal on the environment and human health.
This will contribute to the recycling and other forms of re-utili-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.
02.02.16