Technical Specifications; Disposal - AEG IB 5628 Mode D'emploi

English
28
Also see Fig. (d) on page 3.
1. Press the unlock button at the top end of the brush and pull the brush pad out by a
couple of the top bristles.
2. Clean the brush pad with a nylon brush under running water. If very dirty, soak the
brush pad in mild soapy water briefly beforehand.
3. Let the brush pad dry completely before reinserting it into the housing!
4. To place the brush pad back into the housing, first press the lower end into the mould-
ing. It must click in audibly.

Technical Specifications

Model: .......................................................................................................................................... IB 5628
Net weight: ...................................................................................................................................0.11 kg
Battery: ..................................................................................................2x 1.5 V Type "AAA" / "R03"
The right to make technical and design modifications in the course of continuous product
development remains reserved.
This device complies with all current CE directives, such as electromagnetic compatibility
and low voltage directive and is manufactured according to the latest safety regulations.

Disposal

• Remove the battery from the battery compartment.
• Dispose of the battery at an appropriate collection point or distributor. This product
must not be disposed of in standard domestic refuse.
• Do not dispose of the device with household waste at the end of its service life. Bring it
to an official collection point for recycling. By doing so, you help protect the environ-
ment.