Adjusting The Picture Quality - Denon DVD-3800 Mode D'emploi

ENGLISH
11

ADJUSTING THE PICTURE QUALITY

1
Press the P.ADJ button during playback.
Use the and cursor buttons to select the
0 1
picture memory, then press the ENTER button.
• The display switches as follows:
STD (STANDARD) ´ M1 (MEMORY 1) ´ M2
´ M3 ´ M4 ´ M5
2
STD (Factory default)
When this is selected, both the picture quality
and function are reset to normal.
M1 to M5
Picture quality settings you have adjusted can
be stored here.
Select the item to change using
buttons.
ADJUST MODE
• The contrast , brightness , sharpness and
color (HUE) can be adjusted.
• Perform steps 4 and 5 to adjust the picture
3
quality (ADJUST MODE).
GAMMA (-6 ~ +6)
• Select this if dark portions of the picture are
too dark or bright portions are too bright.
• Perform steps 7 and 8 to adjust the gamma
correction (GAMMA).
Press the ª cursor button to select the adjust
mode, then use the and cursor buttons to
0 1
select the image quality adjustment item.
CONTRAST (-6 ~ +6)
Adjusts the contrast of the image.
BRIGHTNESS (0 ~ +12)
4
Adjusts the picture's brightness.
SHARPNESS (-6 ~ +6)
Adjusts the sharpness of the picture.
HUE (-6 ~ +6)
Adjusts the balance of the green and red. (This
does not affect Progressive Scan images.)
24
0 +10
TOP MENU DISPLAY
2, 3, 4, 5, 7, 8
ENTER
2, 6, 9
MENU PLAY
STILL /
STOP PAUSE
SKIP SLOW / SEARCH
ANGLE SUBTITLE AUDIO SEARCH MODE
REPEAT A-B RANDOM MARKER
SETUP DIMMER PIC.ADJ P.D.MEMORY
ZOOM PAGE
PIC.ADJ
Remote control unit
P I C TURE MODE
S TD M1 M2
Remote control unit
ENTER
Remote control unit
and
0 1
MEMORY 1
Remote control unit
MEMORY 1
CONTRAST
Remote control unit
Remote control unit
Use the • and ª cursor buttons to set the
5
adjustment value.
1
Press the ENTER button.
6
• All the adjustments are stored in the memory.
Use the and
0 1
7
point to be set.
M3 M4 M5
Use the • and ª cursor buttons to adjust the
brightness level of the selected point.
(See "Reference" on page 25.)
• The level decreases (the picture gets darker)
when the ª cursor button is pressed and
increases (the picture gets brighter) when the
• cursor button is pressed.
• Values from 16 to 235 can be set. It is not
GAMMA
8
possible to set in such a way that the level of
0 0 0 0
dark sections exceeds that of bright sections.
NOTE:
• When the CLEAR button is pressed during
gamma correction, all the setting points are
set back to the standard level.
• Progressive images only effective for the first,
third and fifth points from the left.
Press the ENTER button.
9
• All the adjustments are stored in the memory.
GAMMA To exit the picture adjust mode
Press the PICTURE ADJUST button.
0 0 0 0
cursor buttons to select the
Remote control unit
Remote control unit
ENTER
Remote control unit
MEMORY 1 GAMMA
235
0
0 100
Remote control unit
ENTER
Remote control unit