Table des Matières
Publicité
When "AUDIO SETUP" is selected
1
1, 2, 3
1
1
See page 12.
Use the • and ª cursor buttons to select the desired
setting, then press the ENTER button.
AUDIO CHANNEL
Use this to adjust for the connected speaker systems.
DIGITAL OUT
Use this to select the digital output's signal format.
2
LPCM (44.1 KHz / 48 kHz)
Use this to set the digital audio output when playing DVDs
recorded in linear PCM audio.
BASS ENHANCER (2 CHANNEL)
Set whether or not to output audio signals from the
subwoofer when playing two-channel audio signals.
Use the • and ª cursor buttons to select the desired
setting, then press the ENTER button.
q When "AUDIO CHANNEL" is selected:
B Use the • and ª cursor buttons to select the item to
be set, then press the ENTER button.
MULTI CHANNEL (Factory default)
Select this for systems in which three or more
3
speakers are connected.
When MULTI CHANNEL is set, the speaker settings
(SPEAKER CONFIGURATION), speaker output level
adjustment (CHANNEL LEVEL) and speaker distances
(DELAY TIME) can be set.
2 CHANNEL
Select this for systems in which only two speakers
are connected.
REMOTE CONTROL UNIT RC-553
POWER
NTSC / PAL OPEN / CLOSE
ON
OFF
PROG / DIR
1
2
3
CLEAR
4
5
6
V.S.S.
7
8
9
CALL
RETURN
0
+10
TOP MENU
DISPLAY
ENTER
MENU
PLAY
STILL /
STOP
PAUSE
SKIP
SLOW / SEARCH
ANGLE
SUBTITLE
AUDIO SEARCH MODE
REPEAT
A-B
RANDOM
MARKER
SETUP
DIMMER
PIC.ADJ
P.D.MEMORY
ZOOM
PAGE
ENTER
Remote control unit
Remote control unit
AUD I O SE TUP
AUD I O CHANNE L
MUL T I CHANNEL
D I G I TAL OUT
NORMAL
L PCM (4 4 .1 kHz / 4 8 kH z )
OF F
BASS ENHANCER(2 CHANNEL)
OF F
E X I T SE TUP
SE L ECT :
DEC I S I ON : ENTER BUT TON
ENTER
Remote control unit
Remote control unit
AUD I O SE TUP
AUD I O CHANNE L
MUL T I CHANNEL
D I G I TAL OUT
2 CHANNE L
L PCM (4 4 .1 kHz / 4 8 kH z )
BASS ENHANCER(2 CHANNEL)
E X I T SE TUP
SE L ECT :
DEC I S I ON : ENTER BUT TON
B When "MULTI CHANNEL" is selected, use the • and ª cursor
buttons to select the item to be set, then press the ENTER button.
SPEAKER CONFIGURATION
Use this to select the types of the different speakers.
CHANNEL LEVEL
Use this to adjust the output level of the different speakers.
DELAY TIME
Use this to set the distance from the different
speakers to the listening position.
To exit the SPEAKER SETUP mode
Use the ª cursor button to select "AUDIO SETUP" then
press ENTER button.
B When "SPEAKER CONFIGURATION" is selected,
use the • and ª cursor buttons to select the speaker
to be set then press the ENTER button.
• The type of speaker used for the front speakers,
center speaker, subwoofer and surround speakers can
be set. Use the • and ª cursor buttons to select the
speaker type, then press the ENTER button.
LARGE: Select this when a large speaker is connected.
SMALL: Select this when a small speaker is connected.
NONE: Select this when no speaker is connected.
YES:
Select this when a subwoofer is connected.
NO:
Select this when no subwoofer is connected.
When
"FILTER" is selected:
ON (Factory default)
Select this when connecting a subwoofer, for example
B
for playback in the Dolby Digital or DTS modes.
Set to "ON" for normal multi-channel playback.
OFF
3
Set this to play DVD audio 6-channel sources recorded
with "all channel full band frequency".
When "OFF" is set, the speaker size is set to "LARGE" for all
the speakers and the subwoofer setting is set to "YES".
To play this type of software, read the software's
instructions carefully and make analog connections.
Press the RETURN button to return to the
"SPEAKER SETUP" menu.
B When "CHANNEL LEVEL" is selected, use the • and ª
cursor buttons to select the speaker to be adjusted, then
use the
and
cursor buttons to set the level.
0
1
TEST TONE
• Use the
and
cursor buttons to select off, 2 seconds,
0
1
5 seconds or 10 seconds for the test tone, then output
the test tone using the procedure described below.
Front speaker (L)
B
Center speaker
Front speaker (R)
Surround speaker (R)
Surround speaker (L)
Subwoofer
• The volume level output from the front speakers (left and
right channels), center speaker, surround speakers (left
and right channels) and subwoofer can be adjusted.
• The volume level can be adjusted between 0 and -10
dB in steps of 1 dB.
Press the RETURN button to return to the
"SPEAKER SETUP" menu.
ENGLISH
ENTER
Remote control unit
Remote control unit
B
SPEAKER SE TUP
SPEAKER CONF I GURAT I ON
CHANNE L L EVE L
DE L AY T I ME
AUD I O SE TUP
SE L ECT :
DEC I S I ON : ENTER BUT TON
B
SPEAKER SE TUP
SPEAKER CONF I GURAT I ON
F RONT SP
L ARGE
CENT ER SP
L ARGE
SUBWOOF ER
YES
SURROUND SP
L ARGE
F I L TER
ON
SE L ECT :
DEC I S I ON : ENTER BUT TON
Remote control unit
B
SPEAKER SE TUP
CHANNE L L EVE L
TEST TONE
OF F
F RONT L ch
0 dB
CENT ER
0 dB
F RONT Rch
0 dB
SURROUND Rch
0 dB
SURROUND L ch
0 dB
SUBWOOF ER
0 dB
SE L ECT :
DEC I S I ON : ENTER BUT TON
17
Publicité
Chapitres
Table des Matières
