Table des Matières
Publicité
ENGLISH
B When "DELAY TIME" is selected
With 5.1-channel surround sound, ideally the distance
between the listening position and all the speakers
aside from the subwoofer should be the same. The
delay time setting can be used to make the sound
from the different speakers reach the listening
position at the same time.
Use the • and ª cursor buttons to select the setting
item, then press the ENTER button.
• When "DISTANCE" is selected:
METERS (when the 0 cursor button is pressed):
The unit of distance is set to meters ("m").
FEET (when the 1 cursor button is pressed):
The unit of distance is set to feet ("ft").
• When "FRONT Lch", "FRONT Rch", "CENTER",
"SURROUND
Lch",
"SUBWOOFER" is selected:
Use the 0 and 1 cursor buttons to set the
3
distance from the listening position to the different
speakers.
The distance can be set within the range of 0 to
60 feet (18 meters).
The maximum difference in speaker distance for
which adjustment is possible is 15 feet (4.5
meters).
• When "DEFAULT" is selected:
When "DEFAULT" is selected and the ENTER
button is pressed, all the items are restored to their
factory default settings.
When digital connections are made with an AV
amplifier, make the speaker settings on the AV
amplifier.
For DVD audio discs, the disc's settings are given
priority, so the sound may not be produced as set
with the above speaker mode setting.
Press the RETURN button to return to the
"SPEAKER SETUP" menu.
18
Remote control unit
SPEAKER SE TUP
SE L ECT :
DEC I S I ON : ENTER BUT TON
ENTER
"SURROUND
Rch",
Remote control unit
SP EAKE R SE TUP
SE L EC T :
DEC I S I ON : ENTER BUT TON
SP EAKE R SE TUP
SE L EC T :
DEC I S I ON : ENTER BUT TON
w When "DIGITAL OUT" is selected:
NORMAL (Factory default)
ENTER
When playing DVDs recorded in Dolby Digital or DTS,
bitstream signals are output from the digital audio output
terminals. When playing DVDs recorded in linear PCM or
packed PCM, linear PCM signals are output.
Remote control unit
Select "NORMAL" when making digital connections to an
AV amplifier with built-in Dolby Digital and DTS decoder.
B
PCM
DE L AY T I ME
When playing Dolby Digital/DTS bitstream signals or
D I STANCE
ME TERS
DVDs recorded in linear PCM or packed PCM, the signals
F RONT L c h
3 . 6m
are converted into 48 kHz/16-bit PCM (2-channel) signals
F RONT Rc h
3 . 6m
CENT ER
3 . 6m
and output from the digital outputs. When playing DVDs
SURROUND L c h
3 . 0m
recorded in PCM, linear PCM signals are output.
SURROUND Rc h
3 . 0m
SUBWOOF ER
3 . 6m
DE F AUL T
ON
e When "LPCM (44.1 kHz / 48 kHz)" is selected:
OFF (Factory default)
When playing linear PCM or packed PCM DVDs that are not
copyright-protected, for 2-channel PCM audio signals up to
96 kHz, linear PCM signals are output as such without being
converted from the digital outputs. (176.2 kHz and 192 kHz
signals are converted to 88.2 kHz and 96 kHz, respectively.)
PCM signals of 48 kHz/16 bits and lower are output, regardless
of whether they are copyright-protected or not.
3
For DVDs containing multi-channel PCM signals, the digital
B
signals are down-mixed for output into two channels, front left
DE L AY T I ME
and right. (Only the front left and right channels are output for
D I STANCE
ME T ERS
sources for which down-mixing is prohibited.)
F RONT L c h
3 . 6m
When playing copyright-protected linear PCM or packed
F RONT Rc h
3 . 6m
PCM DVDs, in consideration of copyrights, no digital
CENT ER
3 . 6m
signals are output for sources exceeding 48 kHz/16 bits.
SURROUND L ch
3 . 0m
SURROUND Rc h
3 . 0m
When playing such sources, either set to "ON" or make
SUBWOOF ER
3 . 6m
analog connections. (See page 9.)
DE F AUL T
ON
ON
Linear PCM and packed PCM signals are converted to 44.1
kHz or 48 kHz and output. (The PCM digital audio output
signals are converted to 48 kHz or less in consideration of
B
copyrights.) When making digital connections to an AV
DE L AY T I ME
amplifier that is not compatible with 96 kHz/88.2 kHz signals,
D I STANCE
ME T ERS
set to "ON".
F RONT L c h
3 . 6m
When playing DVDs recorded in linear PCM or packed
3 . 6m
F RONT Rc h
PCM and the unit is set to output digital and analog audio
CENT ER
3 . 6m
SURROUND L ch
3 . 0m
signals simultaneously, the analog audio output signals
SURROUND Rc h
3 . 0m
are also converted to 48 kHz or below, so we recommend
SUBWOOF ER
3 . 6m
setting to "OFF" and also making analog connections.
DE F AUL T
ON
r When "BASS ENHANCER (2 CHANNEL)" is selected:
OFF (Factory default)
No sound is produced from the subwoofer.
ON
Sound is produced from the subwoofer.
In this case, set the subwoofer to "YES" at the speaker
settings.
To exit the setup mode
Use the ª cursor button to select "EXIT SETUP", then press the ENTER button. It is also possible to quit
by pressing the SETUP button on the remote control unit.
ENTER
Remote control unit
Remote control unit
B
AUD I O SE TUP
AUD I O CHANNE L
D I G I TAL OUT
NORMAL
L PCM (4 4 .1 kHz / 4 8 kH z)
PCM
BASS ENHANCER(2 CHANNEL)
DENON L I NK
E X I T SE TUP
SE L ECT :
DEC I S I ON : ENTER BUT TON
B
AUD I O SE TUP
AUD I O CHANNE L
D I G I TAL OUT
L PCM (4 4 .1 kHz / 4 8 kH z)
OF F
BASS ENHANCER(2 CHANNEL)
ON
DENON L I NK
E X I T SE TUP
SE L ECT :
DEC I S I ON : ENTER BUT TON
B
AUD I O SE TUP
AUD I O CHANNE L
D I G I TAL OUT
L PCM (4 4 .1 kHz / 4 8 kH z)
BASS ENHANCER(2 CHANNEL)
OF F
DENON L I NK
ON
E X I T SE TUP
SE L ECT :
DEC I S I ON : ENTER BUT TON
Publicité
Chapitres
Table des Matières
