Loading Discs; Changing The Default Settings - Denon DVD-3800 Mode D'emploi

ENGLISH
7

LOADING DISCS

Set discs in the disc tray with the labeled (printed)
2
side facing up.
8 cm disc 12 cm disc guide
guide
Disc tray
NOTE:
• Do not move the DVD-3800 while a disc is
playing. Doing so may scratch the disc.
(1) Opening and Closing the Disc Tray
q Turn on the power.
w Press the OPEN/CLOSE button.
OPEN/CLOSE button
Power button
Disc tray
NOTES:
• Be sure to turn on the power before opening
and closing the disc tray.
• Do not strike on the button with a pencil, etc.
12
(2) Loading Discs
• Pick up the disc carefully so as not to touch the
signal surface and hold it with the labeled side
facing up.
• With the disc tray fully open, set the disc in the disc
tray.
• Set 12 cm discs in the outer tray guide (Figure 1), 8
cm discs in the inner tray guide (Figure 2).
• Press the OPEN/CLOSE button. The disc is
automatically loaded.
• The disc tray can also be closed automatically to
load the disc by pressing the PLAY button.
Figure 1
Outer disc tray
12 cm disc
Figure 2
Inner disc tray
8 cm disc
NOTES:
• If your foreign object is caught in the disc tray
during closing, simply press the OPEN/CLOSE
button again and the tray will open.
• Do not press the disc tray in by hand when the
power is off. Doing so will damage it.
• Do not place foreign objects in the disc tray.
Doing so will damage it.
8

CHANGING THE DEFAULT SETTINGS

Make the initial settings to suit your usage conditions before starting playback.
2
The initial settings are retained until they are next changed, even if the power is turned off.
B
PLAY
1
STILL / PAUSE
3
AL24 PLUS DVD AUDIO
OPEN/CLOSE
¢ ON / STANDBY 5
DVD
PROGRESSIVE
£ OFF
REMOTE SENSOR
1
Turn on the power.
1 • Press the power button, the power indicator lights and the
power turns on.
In the stop mode, press the SETUP button.
• The setup (default settings) screen appears.
NOTE:
• For some menus, the initial values can be changed during
playback.
DISC SETUP
Use this to set the language to be used when playing the disc.
If the set language is not offered on that disc, the discs
default language is set.
OSD SETUP
Use this to set the language for the default setting screen
and messages displayed on the TV screen ("PLAY", etc.).
VIDEO SETUP
2
Use this to set the DVD-3800's screen mode.
(TV aspect, TV type and AV1 video output.)
AUDIO SETUP
Use this to set the DVD-3800's audio output mode.
(Digital and LPCM output settings.)
RATINGS
Use this to disable playback of adult DVDs so that children
cannot watch them. Note that playback of adult DVDs
cannot be disabled if the rating level is not recorded on the
DVD, but that it is possible to disable playback of all DVDs.
OTHER SETUP
These include special settings
COMPRESSION.
Use the 0 and 1 cursor buttons to select the desired
setting item, then press the ENTER button.
Select "DISC SETUP". (See page 13.)
Select "OSD SETUP". (See page 15.)
3
Select "VIDEO SETUP". (See page 15.)
Select "AUDIO SETUP". (See page 17.)
Select "RATINGS". (See page 19.)
Select "OTHER SETUP" (See page 20.)
To exit the setup mode
Use the ª cursor button to select "EXIT SETUP", then press the ENTER button. It is also possible to quit
by pressing the SETUP button on the remote control unit.
1 POWER NTSC / PAL OPEN / CLOSE
ON OFF
PROG / DIR
1 2 3
CLEAR
4 5 6
V.S.S.
7 8 9
STOP
CALL RETURN
0 +10
2 8 9
TOP MENU DISPLAY
6 7
3
PURE DIRECT
ENTER
OFF MODE 1
MODE 2
MENU PLAY
DVD AUDIO-VIDEO PLAYER DVD-3800
STILL /
STOP PAUSE
SKIP SLOW / SEARCH
ANGLE SUBTITLE AUDIO SEARCH MODE
REPEAT A-B RANDOM MARKER
2
SETUP DIMMER PIC.ADJ P.D.MEMORY
ZOOM PAGE
Light
POWER
ON / STANDBY
¢
ON
£ OFF
Main unit Remote control unit
SETUP
Remote control unit
D I SC SE TUP
D I AL OG
SUBT I TL E
D I SC MENUS
E X I T SE TUP
SE L ECT : DEC I S I ON : ENTER BUT TON
CAPTIONS and
Remote control unit
B
ENGL I SH
ENGL I SH
ENGL I SH
ENTER