INFOSEC UPS SYSTEM C3 MPPT Manuel De L'utilisateur page 15

<2V/cell
2 ~ 2.083V/cell
Constant
Current mode
/ Constant
2.083 ~ 2.167V/cell
Voltage mode
> 2.167 V/cell
Floating mode. Batteries are fully charged.
In battery mode, it will present the battery capacity.
Load Percentage
Load >50%
50%> Load > 20%
Load < 20%
Load Information
Indicates an overload.
Indicates the load level (0-24%, 25-50%, 50-74% and 75-100%).
Mode Operation Information
Indicates the unit is connected to the mains.
Indicates the unit is connected to the PV panel.
Indicates load is supplied by the utility power.
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 06 15 AA 59 203 33
Battery Voltage
< 1.717V/cell
1.717V/cell ~ 1.8V/cell
1.8 ~ 1.883V/cell
> 1.883 V/cell
< 1.817V/cell
1.817V/cell ~ 1.9V/cell
1.9 ~ 1.983V/cell
> 1.983
< 1.867V/cell
1.867V/cell ~ 1.95V/cell
1.95 ~ 2.033V/cell
> 2.033
0%~25% 25%~50%
4 bars will flash in turns.
Bottom bar will be on and the other
three bars will flash in turns.
Bottom two bars will be on and the
other two bars will flash in turns.
Bottom three bars will be on and the
top bar will flash.
4 bars will be on.
LCD Display
50%~75% 75%~100%
15