Connecting the AC Adapter
Carefully read the manual for the AC adapter before using the AC adapter.
CAUTION:
Be sure to use the specified AC Adapter [AC adapter, C (Model: M235A) or AC adapter, C1
(Model: M235B)] only.
Should a fault ever occur in the AC adapter, immediately turn off the power to the scanner
and remove the AC cable from the wall socket.
1.
Insert the connector of the AC cable into the AC inlet.
DC cable
2.
Insert the connector of the DC cable into the power supply connector.
DC cable
3.
Connect the plug of the AC cable to the wall socket.
10 CaptureOne User's Manual
Plug
Power supply connector
AC inlet
AC cable*
*AC cable may not be included
with the scanner.