Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installing and Replacing the Franking Cartridge
CAUTION:
Keep the franking cartridges out of the reach of children.
Do not disassemble franking cartridges.
Be careful during handling because the ink can permanently stain clothing.
Seiko Epson recommends using genuine Epson cartridges for your scanner. Products of
other manufacturers may adversely affect the scanner and printing quality, and may result
in the scanner not being able to achieve the specified performance levels.
Do not remove the franking cartridge from the packing box until immediately before its
installation. Leaving the cartridge out of its packing for a prolonged period of time may
adversely affect printing quality.
Use up the franking cartridge within 18 months from the date of production indicated on
the cartridge box.
Dispose of the franking cartridge in accordance with any relevant national or local laws,
ordinances, and regulations.
Follow these steps to install a franking cartridge for the first time or to replace it.
1.
Open the franker cover. (See "Opening the Franker Cover" on page 11.)
2.
If a used franking cartridge is installed, hold the knob at the top of the
cartridge and lift the cartridge out of the scanner.
3.
Carefully insert a new franking cartridge from the top, and push it firmly but
gently until it clicks in place.
4.
Close the franker cover firmly until it clicks in place.
12 CaptureOne User's Manual
Franking cartridge
Publicité
Table des Matières
