LED Indicators
POWER LED
❏
Comes on when the scanner power is on.
ERROR LED
❏
Comes on when the scanner is off line (and when the scanner cover or
franker cover is open.)
❏
Flashes when an error occurs or when waiting for document removal. (See
"Troubleshooting"[on page 19 of this manual] for more information.)
DOCUMENT LED
❏
Comes on when the scanner is ready to process documents in the ASF/SF or
while the scanner is processing documents.
❏
Flashes when the scanner is waiting for document insertion.
Power Switch
Press the power switch to turn on or off the scanner.
Power Switch Cover
WARNING:
If a machine failure has occurred while the
included power switch cover is attached, unplug
the power cable immediately. Continued use
may result in a fire hazard.
The power switch cover is intended to
prevent the power switch from being
pressed accidentally. To use the cover,
place it over the power switch. When turning on or off of the switch is required,
insert a pointed object into one of the holes of the cover, and press the switch.
When the scanner is stored or not in use for an extended period, turn off the
power switch and disconnect the power cord.
8 CaptureOne User's Manual
POWER LED
ERROR LED
DOCUMENT LED