Cebora KINGSTAR 400 TS Manuel D'instruction page 93

Firmware Update
Select this item to update the power source fi rmware.
The update fi le loaded onto the USB pen drive must have the extension .psu.
Insert the pen-drive into the power source USB port
INSTRUCTION
Install Options
Select this item to install the software options in the power source.
The option release fi le loaded on the USB drive must have the extension .txt and is supplied by Cebora after purchasing
the option.
Insert the pen-drive into the power source USB port
Backup
Select this item to back up the jobs and/or user settings.
All
Jobs Only
Users Only
3301256
The update operation does not mean that programs (JOB) and welding data
contained in the machine will be lost.
Turn I and select Firmware Update.
On the File List page, select the fi le to be loaded by turning
I and confi rm using the pushbutton with the checkmark
indicated.
Removal of the USB pen drive will then be requested and
the machine will proceed with the update.
After the update, the machine will restart by itself.
Turn I and select Install Options.
On the File List page, select the fi le to be loaded by
turning I, the name must be the same as the machine
serial number and confi rm using the pushbutton with the
checkmark indicated.
Removal of the USB pen drive will then
be requested and the machine will
install the requested options.
Turn I and select Backup.
Select the relevant option.
Back up the jobs and/or user settings
Back up jobs only
Back up only the available user list using the option Item
No 809
93/109