Quality Control; Gas Regulation Kit; Input Potentiometer; Settings Menu - Cebora KINGSTAR 400 TS Manuel D'instruction

7�3�6

Quality Control

Please refer to the manual of Item 273.
7�3�7

Gas regulation Kit

The kit allows precise adjustment of the gas fl ow during welding and can only be used for MIG type processes.
For details, refer to the Item 436 user manual.
7�3�8

Input potentiometer

ON allows the potentiometric input on the connector on the wire feeder front panel to be read.
OFF potentiometric input variations are ignored.
Whenever an external accessory is connected to the CAN channel, refer to the terminal table in section 9.3
for correct system operation�
7�4

Settings menu

This menu is used for the welding power source basic settings:
7�4�1

Production Mode

This is a power source software option: please refer to the Item No 817 manual
7�4�2

Setting the clock, language

The user interface style can be selected in the same way: User Interface Style
3301256
NOTICE
Press Menu -> Settings to
access the power source settings
page.
Select Clock Setup and press I.
Turn I to select the item to be set�
Press I to confi rm the item.
Turn I to set the desired value.
Press I to confi rm the change.
Select Language and press I.
Turn I to set the desired language.
Press I to confi rm.
89/109