Symbols And Their Meaning - Bosch GAS 55 M AFC Professional Notice Originale

Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.

Symbols and their meaning

Bosch Power Tools
Symbols
The following symbols may provide you with important in-
formation pertaining to the use of your dust extractor. Please
take note of the symbols and their meaning. Knowing what
these symbols mean will help you to use your extractor more
effectively and more safely.
WARNING! Read all the safety instructions and general instructions. Failure to ob-
serve the safety instructions and general instructions may result in electric shock, fire
and/or serious injury.
Dust extractor from dust class M in accordance with IEC/EN 60335-2-69 for the dry
extraction of harmful dusts with an exposure limit of ≥ 0.1 mg/m
WARNING! The dust extractor contains dust particles that pose a risk to health.
Emptying and maintenance procedures, including the disposal of dust contain-
ers, should only be carried out by professionals. Suitable protective equipment is
required. Do not operate the dust extractor without the complete filter system.
Otherwise, you are putting your health at risk.
You can attach an L-Boxx to the top part of the dust extractor for trans-
porting the extractor and to provide space-saving storage for extractor
accessories and/or the power tool.
Do not use the dust extractor with an L-Boxx attached. This will
raise the dust extractor's centre of gravity. The extractor may tip over.
There is a risk of injury and damage if you do this.
Only attach a maximum of one L-Boxx.
The weight of the L-Boxx along with its contents must not exceed
15 kg.
Do not hang the dust extractor on a crane hook, e.g. in order to
transport it. The dust extractor is not suitable for moving with a crane.
There is a risk of injury and damage if you do this.
Do not sit or stand on the dust extractor. The dust extractor may tip
over and become damaged if you do this. This poses a risk of injury.
Automatic start/stop
Extracting dust that accumulates from working power tools
The dust extractor switches on automatically and off again with a time
delay
Switching off
Vacuuming
Vacuuming up dust deposits
English | 19
3
1 609 92A 4LZ | (19.11.2018)