Setting For The Language Of On-Screen Display; Screen Saver; Setting Orbiter; Displaying The Full White Screen - Pioneer PDP-5016HD Mode D'emploi

09 Adjustments and Settings
• If you watch HD broadcasts or HD content from external sources, you
cannot select the screen mode. (The Screen Size setting is always set
to "Full".)
• To enlarge 4:3 normal aspect ratio to 16:9 wide aspect ratio in DTV
mode, press the HD WIDE button.
• Displaying pictures in 4:3 screen mode for an extended period may
cause an after-image.
Setting for the language of on-screen
display
You can select a language to be used for on-screen display such
as menus from among three languages: English, Español and
Français.
1
Press the MENU button.
2
Press the c or d button to move to System, then press
the OK button.
3 Press the c or d button to move to Language.
4 Press the b or a button to select the language (English,
Español or Français).
System
Language
Clock Setting
Parental Control
• The factory default is "English".
5
Press the EXIT button.
• The selected language is effective when receiving digital TV channels
as well.

Screen Saver

You can prevent temporary or permanent screen burn caused
by displaying a still image for a long time.

Setting Orbiter

This function gradually shifts the screen position at time
intervals.
1
Press the MENU button.
2 Press the c or d button to move to Screen, then press
the OK button.
Screen
Screen Size
PIP/TWIN
Screen Saver
36
En
English
Full
3
Press the c or d button to move to Screen Saver, then
press the OK button.
Screen Saver
Orbiter
Orbiter Range Small
Full White
• The factory default is "On".
4
Press the c or d button to move to Orbiter.
5
Press the b or a button to select the required option (On
or Off).
6 To adjust the orbiter range, press the c or d button to
move to Orbiter Range.
7 Press the b or a button to select the required option as
follows:
Small - Mid - Large
Screen Saver
Orbiter
Orbiter Range Small
Full White
• The factory default is "Mid".
8
Press the EXIT button.
• The "Orbiter Range" can be selected only when "Orbiter" is "On".
• It is recommended to select "Mid" for the "Orbiter Range". If you are
distracted by the orbiter movement, select "Small" or "Off".

Displaying the Full White screen

When displaying a still picture for a long time, it is
recommended that you set "Full White" to "On" to reduce
temporary or permanent screen burn.
Screen Saver
Orbiter
Orbiter Range Small
Full White
1
Press the MENU button.
2 Press the c or d button to move to Screen, then press
the OK button.
3 Press the c or d button to move to Screen Saver, then
press the OK button.
4
Press the c or d button to move to Full White.
5
Press the b or a button to select "On".
• If you cancel the Full White mode, press the EXIT button. It is also
canceled automatically when 20 minutes elapse.
On
Off
On
Off
On
Off