Tool Specifications; Operating Pressure; Tool/Fastener Specifications - DeWalt DWEHF1838K Guide D'utilisation

All dimensions in inches unless otherwise specified.
Description
Engine Type
Operation Pressure Range
Maximum Operation Pressure
Fastener Type
Fastener Gauge
Fastener Range
Magazine Capacity
Length
Width
Height
Weight

Operating Pressure

70 to 120 psig (4.9 - 8.4 kg/cm
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
The DWEHF1838K requires 1.94 cubic feet per minute or cfm (55 liters per minute or L/min) of free air at
80 PSI (5.6 kg/cm 2 ) to operate at a rate of 60 fasteners per minute. The DWLHF2025K requires 1.90 cubic
feet per minute or cfm (54 liters per minute or L/min) of free air at 80 PSI (5.6 kg/cm
of 60 fasteners per minute. To determine the appropriately sized air compressor, take the actual rate
at which the tool will be run and compare the required cfm (L/min) to the compressor's free air delivery
(cfm or L/min) at 80 PSI (5.6 kg/cm
For example, if your fastener usage averages 30 fasteners per minute, you need 50% of the required air volume
(cfm or L/min) that is required to operate the tool at the rate of 60 fasteners per minute. In this case, be sure
that your air compressor can deliver a minimum of 0.97 cfm (27.5 L/min) at 80 PSI (5.6 kg/cm
performance.
Tool Model
DWEHF1838K
DWLHF2025K
*Visit www.D WALT.com for further details.
e
NOTE:
D WALT tools have been engineered to provide superior customer satisfaction and are designed to achieve
e
maximum perfomance when used with precision D
D WALT cannot assume responsibility for product performance if our tools are used with fasteners
e
or accessories not meeting the specific requirements established for genuine D
and accessories.
DWEHF1838K
18-ga Flooring Stapler
Oil-free
70-120 psig (4.9 - 8.4 kg/cm
120 psig (8.4 kg/cm
DNS181XX-2 Series
18 Gauge
1" - 1-1/2" (25 mm - 38 mm)
100
9-1/4" (235 mm)
2-3/4" (70 mm)
9-7/8" (251 mm)
3.5 lb (1.57 kg)
2
). Select the operating pressure in this range for best fastener performance.
2 ).
FASTENER SPECIFICATIONS
Fastener
Fastener SKU
Type
DNS18100-2
Staples
DNS18125-2
DNS18150-2
Staples
DWCS20100
WALT fasteners engineered to the same exacting standards.
e
-5-

TOOL SPECIFICATIONS

DWLHF2025K
20-ga Flooring Stapler
Oil-free
) 70-120 psig (4.9 - 8.4 kg/cm
2
) 120 psig (8.4 kg/cm
2
DWCS20100
20 Gauge
1" (25 mm)
125
9-1/4" (235 mm)
2-3/4" (70 mm)
8.5" (216 mm)
2.9 lb (1.32 kg)
2
Crown
Gauge
Width
1/4" (6.3 mm) 18
1/4" (6.3 mm) 18
1/4" (6.3 mm) 18
3/16"
20
(4.7 mm)
)
2
)
2
) to operate at a rate
2 ) for optimum
Length
1"
(25 mm)
1-1/4"
(31.75 mm))
1-1/2"
(38 mm)
1"
(25 mm)
WALT fasteners
e