Recline Adjustment; Height Adjustment - Joie I-Quest signature Mode D'emploi

Recline Adjustment

see images -
11 12
Squeeze the recline adjustment
button 11 , to adjust the enhanced
child restraint to the proper position.
The recline angles are shown as
!
Base positioning may need
adjustment (IN/OUT) to ensure
correct fitment and access to all
recline positions.
Please recheck the load leg position
after reclining.
There are 1-5 recline positions for
rear facing mode and 1-10 recline
positions for forward facing mode.
12
13
11
12

Height Adjustment

for Head Support and Shoulder Harnesses
see images -
13 15
1. Please adjust the head support
and check if the shoulder
harnesses are at the correct
height according to
13
!
When used rear facing, the
shoulder harness height must be
even with or below the top of
child's shoulders.
13
!
When used forward facing, the
shoulder harness height must be
even with the top of child's
shoulders. 13
2. Squeeze the head support
adjustment lever 14 , meanwhile
pull up or push down on the head
support until it snaps into one of
the 7 positions. The head support
positions are shown as 15 .
13
14
2
1
15
14