Joie I-Quest signature Mode D'emploi page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
6. Pull down the adjustment
webbing and adjust it to the
proper length to make sure your
child is properly secured.
!
Always keep child secured in
harness and properly tightened by
removing any slack.
Using in the Forward Facing Mode
(Child height 76cm-105cm/Child weight ≤
18.5kg/15 months - 4 years old)
see images
-
25
32
!
Please install the enhanced child
restraint on the vehicle seat, and
then put the child in the enhanced
child restraint.
!
First slide base fully out
25
push the seat down into the base.
-2
25
!
Push the seat down into the base
, if the enhanced child restraint
25
is secure, the enhanced child
restraint indicator shows green.
19
24
24
25
-1
then
26
1
!
Pull up on the seat to be sure it is
securely latched into the base.
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
!
The load leg must be installed
correctly with green indicator.
!
Press the base release button and
push the base back against the
vehicle seat until tight.
!
Base positioning may need
adjustment (IN/OUT) to ensure
2
correct fitment and access to all
recline positions.
!
Due to vehicle seating
configuration, all 10 recline
positions may not be accessible.
26
27
27
2
1
20

Publicité

Table des Matières
loading

Table des Matières