Securing Child - Joie I-Quest signature Mode D'emploi

Securing Child

1. To lengthen the shoulder harness
belts, press the harness
adjustment button while pulling
out the shoulder harnesses to
loosen. (grab the both two
shoulder pads to pull).
20
2. Unlock the buckle of the
harnesses by pressing the red
button. 21
3. Fix the buckles on the both sides
of seat where the buckle markings
are to make placing the child in
rear facing mode more
convenient.
22
17
20
21
22
We recommend using the full
infant Insert while the baby
is under 60cm and can be
used until they outgrow the
infant Insert.
The infant Insert increases
1
side impact protection.
4. Place the child into the enhanced child restraint and pass both arms
through the harnesses.
!
After the child is seated, recheck whether the shoulder harnesses
are at the proper height.
5. Engage the buckle. Please refer to
23
Remove the head support portion
of the infant Insert when the child's head
no longer fits comfortably.
Remove the lower part of the
infant Insert when the infant no
longer fits comfortably.
Each part of the body portion
of the infant insert can be
used by itself.
2
23
18