Joie I-Quest signature Mode D'emploi page 12

!
To release the seat, lift the seat by
the harness -2 upwards while
28
pressing the attachment releasing
handle. -1
28
Securing Child
1. To lengthen the shoulder harness
belts, press the harness adjustment
button while pulling out the shoulder
harnesses to loosen. (grab the both
two shoulder pads to pull).
2. Unlock the buckle of the harnesses
by pressing the red button.
21
28
29
29
30
30
3. Fix the buckles on the both sides of
the seat shown as
on the both sides of seat to make
2
placing the child in forward facing
mode more convenient.
4. When installing the enhanced child
restraint in the forward facing mode,
do not use the infant insert.
1
5. Place the child into the enhanced
child restraint and pass both arms
through the harnesses. Engage the
buckle.
!
After the child is seated, recheck
whether the shoulder harnesses are
at the proper height.
6. Pull down the adjustment webbing
and adjust it to the proper length to
make sure your child is properly
secured.
32
!
Always keep child secured in
harness and properly tightened by
removing any slack.
31
31 which located
Remove the body portion
of the infant insert
when the infant's shoulders
no longer fit comfortably.
32
22