Nidec LEROY-SOMER FFB Guide D'installation page 23

PS4 : INSPECTION, MEASURING & TEST EQUIPMENT MANAGEMENT
INCORPORATION (F)LS(ES) motor associate with FCR
QUALITY
MANAGEMENT
MOTEURS LEROY SOMER,
We,
declare, under our sole responsibility, that the following products :
(F)LS or (F)LSES* , LSMV* series motor associated with FCR or FFB series brake
bearing the following markings on their nameplates:
CE II 3D
comply with:
European Directives:
• Low Voltage Directive
• ROHS II Directive
• Electromagnetic Compatibility Directive
• Erp Directive:
• ATEX Directive:
European and international standards:
This conformity permits the use of these ranges of products in machines subject to the application of the Machinery Directive
2006/42/EC, provided that they are integrated or incorporated and/or assembled in accordance with, amongst others, the regulations of
standard EN 60204(All parts) "Electrical Equipment for Machinery".
The products defined above may not be put into service until the machines in which they are incorporated have been declared as
complying with the applicable Directive.
Installation of these motors shall be done by a professional who is responsible to comply with the regulations, decrees, laws, orders,
directives, application circulars, standards, rules or any other document relating to the installation site. He will be also responsible for
the respect of values stamped on rating plate(s), instruction manual, installation instructions, maintenance manuals and/or any other
document supplied by the manufacturer. MOTEURS LEROY-SOMER accepts no liability in the event of failure to comply with these
rules and regulations.
Consulter le système de gestion documentaire afin de vérifier la dernière version de ce document.
For the latest version of this document, please access the document management system.
Installation guide FFB brake motors
5286 en - 2021.01 / e
REGULAR SERVICING
EU DECLARATION OF CONFORMITY AND
or FFB brake in zone 22
Doc type : S6T002 Rev D du/from 16/03/2017
boulevard Marcellin Leroy CS10015, 16915 ANGOULEME cedex 9, France,
Or the same series equipped with VARMECA VMA 3x
For use in the presence of combustible dust
Ex tc IIIB T125°C Dc
2014/35/EU
2011/65/EU
2014/30/EU
2009/125/CE and regulation (EC) application
640/2009 and corrections (valid only for above products marked with an
asterisk*)
2014/34/EU
IEC-EN 60034-14:2018 ; 62262:2002
EN 50581:2012 ; 60034-1:2010 ; 60034-7:1993/A1:2001 ;
60034-9:2005/A1:2007 ; 60079-0:2012/A11:2013 ; 60079-31:2014 ;
60529:1991/A1:2000/A2:2014 ; 61800-5-2:2017
IEC 60034-1:2011 ; 60034-7:1992/A1:2000 ; 60034-9:2003/A1:2007 ;
60079-0:2011 ; 60079-31:2013
R ☐
M
(zone 22) Non Conducting dust
Date and Signature of plant technical manager:
P.CARRIOT
Classement/File: S4T032
Révision: E
Page : 2 / 2
Date: 02/ 09/ 2019
Annule et remplace/Cancels and
replaces: Révision D du/from
I ☐
18/ 06/ 2019
11