Fermax F1436 Manuel De L'utilisateur page 31

*This setting has lower priority then the setting made from fast menu actions.
In [Address] setting page you can turn [Intercom Receive Enable] on or off and set the
•
intercom address of the monitor: master, ext1 or ext2. The address of different monitors
in one network cannot be duplicated.
Submenu [Panel/Cam]: Indicates if there is camera Cam1 associated with Panel 1,
•
Panel 2 and camera Cam2 associated with Panel 2.
Remark:
Devices are configured independently in each monitor if there is more than one.
•
A monitor that has not registered the panel 2 will not receive call from it, not either
•
will be able to realize auto-on.
In [Language] setting page you can set the language of the monitor.
•
In [Time] setting page you can set manually the date & time of the monitor and select the
•
date format. Date & time can be also set directly from App.
10