Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6. Commissioning, operation
Compression fitting
1. Screw the compression fitting (1) into the process connection and
tighten.
2. Insert the tapered side of the ferrule (2) into the fitting and screw on the
union nut (3) hand-tight.
3. Insert the temperature switch into the fitting and maintain it at the
required immersion depth. Tighten the union nut (3) with approx. 50 Nm.
4. Optional
Check the assembly: Loosen the union nut. The ferrule is firmly
connected to the sensor tube.
WIKA operating instructions temperature switch, model TSD-30
EN
19
Publicité
Chapitres
Table des Matières
