AFi LISA Série Manuel De Maintenance page 76

The shocks absorbers are located on the bottom
of the machine.
Before starting, open the lid, switch off the
centrifuge and unplug power cable
CAUTION: THE FOLLOWING
OPERATIONS MUST BE PERFORMED
BY A QUALIFIED TECHNICIAN
Step1: Extract the front panel and
remove the motor.
Step 2: Toggle the centrifuge on the
back and loosen all the screws and nuts so as to
remove the weight
Notice Originale - Rev.1.3
PROCEDURE AP2.017
SHOCK ABSORBER REPLACEMENT (VENTILATED)
Manuel Maintenance – Lisa
Fig 1
Motor extraction
2/ 3