AFi LISA Série Manuel De Maintenance page 67

The tachometer sensor is located under the
motor. Please note that the operation will be
different according the model of the machine
(refrigerated or ventilated)
Before starting, open the lid, switch off the
centrifuge and unplug power cable
CAUTION: THE FOLLOWING
OPERATIONS MUST BE PERFORMED
BY A QUALIFIED TECHNICIAN
Step 1: Remove the front panel then
disconnect motor wires and tachometer plug.
Also cut the collar tie
Step 2: Extract the motor seal then loose
the 4 screws of the motor and remove it.
(Clean the silicone around seal for
refrigerated model)
Please pay attention to the wires
Notice Originale - Rev.1.4
PROCEDURE AP2.009
TACHOMETER SENSOR REPLACEMENT
Manuel Maintenance – Lisa / Loreena
Fig 1
Front panel removed
1/ 3