AFi LISA Série Manuel De Maintenance page 56

PROCEDURE AP2.005
GAS SPRING REPLACEMENT (VENTILATED MODEL)
The gas spring is located in the back right side
of the machine (fig 1). Please pay attention to
keep out little parts from hole.
Before starting, open the lid, switch off the
centrifuge and unplug power cable
CAUTION: THE FOLLOWING
OPERATIONS MUST BE PERFORMED
BY A QUALIFIED TECHNICIAN
Fig 1
Step 1: Remove the circlip and extract
the axis.
Step 2: Maintain the lid and extract the
motor seal. Then loose the 3 screws
maintaining the bowl
Centrifuge without bowl and motor seal
Manuel Maintenance – Lisa / Loreena
Notice Originale - Rev.1.4 1/ 3