AFi LISA Série Manuel De Maintenance page 64

Step 6: Set the Unlocking Tempo
Value (UT)
Step 7: Set the Locking Tempo value
(LT) using the control panel: align the
lines on the lock
Step 8: Check the alignment by
Opening and closing the lid at least 5 times
Step 9: Put the front panel in place
Notice Originale - Rev.1.4
PROCEDURE AP2.007
LOCK REPLACEMENT
Manuel Maintenance – Lisa / Loreena
Setting screen for the LT and UT tempos
Alignment marks for the lock
4/ 4