AFi LISA Série Manuel De Maintenance page 61

The lock is located in front of the machine,
behind the engraved panel. (fig 1 and 2)
Before starting, open the lid, switch off the
centrifuge and unplug power cable
CAUTION: THE FOLLOWING
OPERATIONS MUST BE PERFORMED
BY A QUALIFIED TECHNICIAN
Step 1: Remove the front panel and
disconnect the ground wire
Step 2: Loose the power contactor
with cables and also connector
Step 3: Remove the screws of the
lock and slide it to the left. Disconnect also
the ground wire
Notice Originale - Rev.1.4
PROCEDURE AP2.007
LOCK REPLACEMENT
Manuel Maintenance – Lisa / Loreena
(fig 1)
Ventilated model
(fig 2)
Refrigerated model
1/ 4