Switching The Zone Setting Of The Remote Control - Sony STR-DA5800ES Mode D'emploi

Setting the priority for the main
zone and zone 2
When the Zone2 Out function is enabled and
you select the same HDMI input for both the
main zone and zone 2, there may be some
interference on the audio and video signals in
the main zone. To avoid possible interference,
you can place priority on the main zone for
HDMI input selection.
1
Select "Settings" from the
home menu, then press
2
Select "HDMI Settings," then
press .
3
Select "Priority," then press
.
4
Select "Main Only," then press
.
Switching the zone
setting of the remote
control
The remote control is basically designed for
use in the main zone. The zone setting of the
remote control is basically for use in zone 2. If
you want to use it in zone 3, switch the zone
setting of the remote control.
.
RM SET
UP
SHIFT
1
Press ?/1 while pressing RM
SET UP.
The AMP and ZONE buttons flash.
2
Press ZONE.
The AMP button goes off, the ZONE
button keeps flashing and the SHIFT
button lights up.
3
Press the numeric button 2 for
the zone 2, or 3 for the zone 3
while the ZONE button is
flashing.
The ZONE button lights up.
4
Press ENT/MEM.
The ZONE button flashes twice and the
remote control switches to zone 2 or
zone 3 mode.
?/1
AMP
ZONE
2, 3
ENT/
MEM
81 US