Enjoying Images/Sound From Connected Equipment - Sony STR-DA5800ES Mode D'emploi

Enjoying images/sound
Enjoying images/sound
from connected
equipment
Input
buttons
VOL
MUTING
1
Select "Watch" or "Listen" from
the home menu, then press
The menu item list appears on the TV
screen.
2
Select the equipment you want,
then press
52
US
ZONE
V/v/B/b,
HOME
.
3
Turn on the equipment and
start playback.
When a Sony BD/DVD player or other
device is equipped with the IR blaster,
you can turn them on or off. (Operation of
all the devices is not guaranteed.)
4
Press VOL +/– to adjust the
volume.
To select the input source
You can turn the INPUT SELECTOR dial on
the receiver or press the input buttons on the
remote control to select the equipment you
want.
To select the input source for zone 2 or zone 3,
press ZONE SELECT on the receiver or
ZONE on the remote control to select zone 2
or zone 3 first ("ZONE 2 [input name]" or
"ZONE 3 [input name]" appears on the display
window).
Tips
You can adjust the volume differently using the
MASTER VOLUME knob on the receiver or the
VOL +/– button on the remote control.
• To turn the volume up or down quickly
– Turn the MASTER VOLUME knob quickly.
– Press and hold the VOL +/– button.
• To make fine adjustment
– Turn the MASTER VOLUME knob slowly.
– Press the VOL +/– button and release it
immediately.
To activate the muting function
Press MUTING on the remote control. To
cancel, press MUTING on the remote control
again or press VOL + to raise the volume. If
you turn the receiver off while the sound is
.
muted, the muting selection is cancelled.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.