Setting The Speakers In Zone 2; Setting The Hdmi Output In Zone 2 - Sony STR-DA5800ES Mode D'emploi

Setting the speakers in
zone 2
When the speakers in zone 2 are connected to
the SURROUND BACK (ZONE 2) terminals
of the receiver (page 76), make the setting so
that the sound selected in zone 2 is output from
the speakers connected to the SURROUND
BACK (ZONE 2) terminals.
For details, see "Speaker Connection" in the
Speaker Settings menu (page 102).
Set the volume control for
zone 2
You can set the volume control for the ZONE
2 AUDIO OUT jacks variable or fixed.
1
Select "Settings" from the
home menu, then press
2
Select "Zone Settings," then
press .
3
Select "Zone Setup," then press
.
4
Select "Line Out" for "Zone2,"
then press
5
Select the parameter you want,
then press
Parameter
Variable
80
US
.
.
.
Explanation
The volume control is set to
–40 dB initially.
When you select this
parameter, the volume for
the ZONE 2 AUDIO OUT
and the SURROUND
BACK (ZONE 2) terminals
can be changed in
conjunction with each other.
Recommended when using
a power amplifier.
Parameter
Fixed
Setting the HDMI output
in zone 2
When equipment such as a TV or A/V
amplifier is connected to the HDMI ZONE 2
OUT jack, you can output HDMI signals from
the equipment in zone 2.
For details, see "3 Making a zone 2
connection using HDMI" (page 77).
Setting the Zone2 HDMI output
You can output the signals from HDMI IN
jacks to Zone2 equipment via the HDMI
ZONE 2 OUT jacks as follows:
1
Select "Settings" from the
home menu, then press
2
Select "HDMI Settings," then
press .
3
Select "Zone2 Out," then press
.
4
Select "On," then press
Note
• When the Zone2 Out function is enabled, the
following functions are disabled:
– Control for HDMI ("BRAVIA" Sync)
– Fast View (Including Preview for HDMI: On)
Explanation
The volume control is fixed
to ±0 dB. Recommended
when using a device with
the variable volume control.
.
.