Installation Instructions - Danby DWM060WDB Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour DWM060WDB:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation Instructions

FEATURES
1. Detergent Case
2. Inner Tub
3. Control Panel
4. Base
5. Noise Proof Plate
6. Adjustable Foot or Roller
7. Drain Hose
8. Power Supply Cord
9. Pulsator
10. Inlet Hoses
LEVELING LEG AND ROLLERS
If the fl oor is uneven, adjust the levelling leg. Do not insert pieces of
wood or any other objects under the foot.
Turn the nut clockwise to release the screw adjuster on the foot.
Rotate the foot to raise or lower it until it stands fi rmly on the
ground.
Lock the foot in position by turning the nut counter-clockwise
until it comes up against the bottom of the machine.
For portable applications, the washing machine comes with four
North/South rollers that can easily be installed to assist in the
movement of the machine to and from the sink. Carefully (with
the help of another person), lay the unit on its back. Install the
rollers into the bottom of the base as depicted.
Return the machine to the upright position. When the machine
is positioned for operation set the height of the adjustment foot
slightly higher than the front roller to prevent movement of the
machine during wash and spin operation.
NOTE: Not all movement will be totally eliminated, this is normal.
1
2
3
4
5
3
10
9
8
7
6

Publicité

Table des Matières
loading

Table des Matières