Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
PROBLEM
Washer does not operate
No water or insuffi cient water supply
The washing machine does not drain
Washing machine vibrates or is too noisy •
Washing machine does not spin
ERROR CODES
E1 - Unable to drain - Check the placement of the drain hose or see if the hose or drain are blocked.
E2 - Spin malfunction - Check to see if the lid is closed completely, service may be needed.
E3 - Unable to spin - Uneven load, the machine is on an uneven surface.
E4 - Unit failed to fi ll with water - The water supply may be off, the inlet valve fi lter is blocked, water
pressure is not strong enough.
E0 - The unit beeps for 10 seconds when the START/PAUSE button is pressed - Call for service.
•
Never clean portable washer parts with fl ammable fl uids. The fumes can create a fi re hazard or
explosion.
POSSIBLE CAUSE
•
Not plugged in.
•
The circuit breaker tripped or a blown fuse.
•
The lid is not closed.
•
Make sure the water source is turned on.
•
The water source faucet is not turned on.
•
The water source hose is frozen.
•
The water intake hose is bent.
•
The fi lter on the water intake hose is clogged.
•
The drain hose is squashed or bent.
•
The water hose mesh fi lter is clogged.
Check to assure that the washer is level.
•
The washing machine is touching another object.
•
The laundry load is not balanced.
•
The lid is not closed.
•
The washer is not on a level surface.
11
Publicité
Table des Matières
