Danby DWM060WDB Guide D'utilisation Et D'entretien page 12

Operating Instructions
CHOOSING A WASH CYCLE
1. Turn on the power supply. Press the POWER button and the indicator light "00" will illuminate.
2. Choose a program. The selected program code will display. Press the PROGRAM button to
choose the desired function, the corresponding indicator will blink. For example, if you select "Auto
Wash" the unit will indicate cycle "01." Press the "START/PAUSE" button, the washing machine
will run automatically. Close the lid, or the machine will not operate.
3. Choose the water level. Press the WATER LEVEL button to choose the appropriate water level
according to the wash quantity. The corresponding indicator will blink.
4. DELAY FUNCTION, Choose a program by pressing the PROGRAM/DELAY button, the select-
ed program code will be indicated. Press the "START/PAUSE" button. The washing machine will
chime after 3 seconds. While the unit is chiming, keep pressing the PROGRAM/DELAY button
until you reach your desired delay time, for example, if you want the unit to delay for 5 hours, the
display will show "05." Close the lid, or the machine will not operate.
5. MUTE FUNCTION, If you do not want the unit to chime while the washing machine is running,
press the POWER button and the indicator will display "00," press the "START/PAUSE" button for
1-2 seconds. The MUTE function has now been activated. To deactivate the MUTE function press
the "START/PAUSE" button again. Run your washing machine as you normally would.
Note: If you want to change the program while the unit is running, you must press the "START/
PAUSE" button. The water level can be changed when the unit is running. If you change the water
level to a higher setting when the unit is running, the unit will stop running to add more water, once
this is complete, the unit will automatically start running again.
9