Installation Instructions
ACCESSORIES AND PREPARATION
Ensure that all provided accessories are present and accounted for:
•
Two inlet hoses
•
One Quick Connect faucet adapter
•
One noise proof plate and screws
•
Two rollers
You will need the following tools to install the washer:
•
Wrench
•
Pliers
•
Screwdriver
1. Remove shipping brace. Save the shipping brace and use it to prevent damage to washer compo-
nents whenever washer is moved or transported to a new location. The shipping brace is a small
plastic brace that is adhered to the packing styrofoam.
2. Clean the interior surface with lukewarm water using a soft cloth.
3. Allow 2 inches of space between the back and sides of the appliance.
•
Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed toward a certifi ed electrician.
•
Plug the washer into an exclusive, properly installed-grounded wall outlet.
•
Don't use excessively hot water (50°C / 122°F or more). Plastic parts may be deformed or dam-
aged. Also, clothing may be deformed or bleached.
•
Before washing, check all pockets. If nails or pins remain in pockets, they may damage the wash-
er or clothes.
•
Never splash water on the control panel.
•
Put your laundry into the washer evenly. Uneven laundry may cause noise or vibration.
LOCATION
Before you install the portable washer, select a location with the following
characteristics:
•
A hard level surface.
•
Away from direct sunlight. Direct sunlight may affect the acrylic coating,
plastic and electrical components.
•
Adequate ventilation.
•
Away from sources of heat such as fi replaces or stoves.
•
Make sure that the washing machine does not stand on its power cord.
•
Ventilation openings must not be obstructed by carpeting when the porta-
ble washer is installed on a carpeted fl oor.
INSTALLING THE NOISE PROOF PLATE
Take the noise proof plate
out of the package.
The opening of the noise
proof plate is at the bot-
tom of the machine.
Insert the noise proof
plate into the washing
machine base.
4
Lay down the machine
and secure the noise
proof plate by fastening
the two (2) screws.